Product Description
Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls. Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads. The easy entry system allows line to engage without being drawn through the cam; just pull the line straight down and the cam opens and holds perfectly. Lightwight, fiber-reinforced Carbo-Cams® are for racing where weight is critical, or where adjustments are less frequent.
Tough, lightweight Cam-Matic cleat has carbon-matrix pawls, two rows of carbon-black Delrin® ball bearings, and stainless steel wear-strip.
An optional fairlead allows the cleat to be used when lines enter or leave the cam at unfair angles.
Specifications
- Height: 1-3/32″
- Length: 2-9/16″
- Width: 1-1/4″
- 1-1/2″ hole-to-hole
- Weight: 1.44 oz.
- Minimum line diameter: 1/8″
- Maximum line diameter: 3/8″
- Fastener spacing: 1-1/2″
- Maximum working load: 200 lb.
- Breaking load: 500 lb.
- Fasteners: #10 (5 mm) FH
- Harken #365
Hobie Cat® uses #H365 for this item.
